Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
DeWalt 7-1/4-inch 60-tooth cordless mitre saw blade for smooth, precise wood cutting.
DeWalt

DeWalt 7-1/4" 60-Tooth Cordless Miter Saw Blade

$35.79 - $35.79
$35.79
$35.79 - $35.79
$35.79
Availability:
In Stock
SKU DW7116PT

Package Quantity: 1

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The DeWalt DW7116PT miter saw blade 7-1/4 in 60T is designed for precision trimming and general-purpose cutting with compatible cordless miter saws. Its ultra-sharp carbide-tipped teeth help reduce tear-out and splintering, producing clean edges on suitable wood materials. The optimised tooth geometry supports straight, precise cuts, while the redesigned blade plate and body slots help reduce vibration for improved cut quality. A ToughCoat anti-stick coating helps reduce friction and material build-up, while the thin-kerf design supports smooth cutting. The DeWalt 7-1/4" 60T miter saw blade DW7116PT is suitable for trim, mouldings and pre-fabrication work when paired with compatible equipment.



  • 60 Carbide-Tipped Teeth

    The 60-tooth configuration supports clean, accurate cuts in compatible wood materials and trim components.




  • Precision Trim Cutting

    The high tooth count is designed for fine trimming, mouldings and applications where a smooth finish matters.




  • Reduced Tear-Out and Splintering

    Optimised tooth geometry and face-ground teeth help minimise splintering and tear-out for cleaner finished surfaces.




  • ATB Tooth Geometry

    The alternate top bevel tooth configuration supports clean cutting performance on trim, mouldings and other compatible wood applications.




  • Face-Ground Teeth

    Face-ground teeth are designed to support precise, clean cuts where finish quality is important.




  • Vibration-Reducing Plate Design

    Specially designed body slots help reduce vibration, supporting better control and consistent results during precision cutting.




  • ToughCoat Anti-Stick Coating

    The ToughCoat coating helps reduce friction and material build-up during cutting for smoother blade operation.




  • Thin-Kerf Design

    The 0.063-inch kerf provides a narrow cutting profile that removes less material than a wider-kerf blade.




  • Trim and Moulding Applications

    The blade is suited to trim, moulding and pre-fabrication applications where clean, accurate cuts are required.




  • Cordless Miter Saw Compatibility

    The blade is positioned for use with compatible cordless miter saw applications, including the stated DCS361 application.






  • Brand:
    DeWalt

  • Model / MPN / SKU:
    DW7116PT

  • Product Type:
    Precision Trim Miter Saw Blade

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    60

  • Arbor Size:
    5/8 inch

  • Tooth Tip Material:
    Carbide

  • Tooth Configuration:
    Alternate Top Bevel (ATB)

  • Hook Angle:
    7 degrees, according to retailer specifications

  • Kerf / Cut Width:
    Approximately 0.063 inch

  • Plate Thickness:
    Approximately 0.039-0.040 inch, depending on listing

  • Maximum Operating Speed:
    7,000 RPM, according to retailer specifications

  • Coating:
    ToughCoat anti-stick coating

  • Intended Application:
    Precision trimming, mouldings and pre-fabrication

  • Intended Material:
    Wood and compatible wood-based materials

  • Recommended Tool:
    Compatible cordless miter saw

  • Package Contents:
    1 saw blade



Frequently Asked Questions

The DeWalt DW7116PT is a 7-1/4-inch, 60-tooth precision trim miter saw blade designed for use with cordless miter saws. It is specifically positioned for trim, moulding and pre-fabrication, with carbide teeth and a thin-kerf design for smooth cuts.

The DW7116PT is a 7-1/4-inch, 60-tooth blade with Alternate Top Bevel (ATB) tooth geometry and face-ground teeth. Its ultra-sharp carbide teeth are designed for clean cutting, while the face-ground tooth design helps minimise splintering for a high-quality surface finish.

A 60-tooth configuration can be well suited to finish-cutting applications where a clean surface is important. The DW7116PT also uses face-ground teeth specifically designed to minimise splintering, although results will still depend on the material, blade condition and cutting technique.

The DeWalt DW7116PT is a 7-1/4-inch, 60-tooth blade with a 5/8-inch arbor and carbide-tipped teeth. It is designed for cordless miter saw use and is positioned for trim, moulding and pre-fabrication applications.

The DW7116PT is designed for cordless miter saws and is specifically listed for pre-fabrication as well as trim and moulding. Its 60-tooth configuration, carbide cutting edges and thin-kerf design are intended to support clean, precise cuts.

Use a blade suited to finish work and make sure its tooth geometry, sharpness and size match the material and saw. The DW7116PT combines ATB geometry, face-ground teeth and ultra-sharp carbide with a thin kerf to support clean cuts and minimise splintering.

Splintering can be affected by blade selection, tooth condition, cutting technique and how securely the material is supported. The DW7116PT uses face-ground teeth designed to minimise splintering, but a worn or damaged blade and poor setup can still affect the finish.

Make sure the blade is correctly fitted, the workpiece is securely supported and the saw and blade are compatible. The DW7116PT features patented body slots and a plate design intended to reduce vibration and support better cut quality.

The exact product is the DeWalt DW7116PT 7-1/4-inch 60-tooth Precision Trim Miter Saw Blade. Check the current PowerBolt & Tool listing for the latest price and availability, as stock and pricing can change.

The DW7116PT is designed as a precision trim blade with 60 ATB teeth, ultra-sharp carbide and a thin kerf. Its face-ground teeth, body slots and trim-focused design make it suitable for fine-finish applications when used with a compatible saw and material.

A 60-tooth blade is generally better suited to clean, finish-oriented crosscuts, while a 24-tooth blade is typically more appropriate when faster, more general-purpose cutting is the priority. The right choice depends on the material, required finish, cutting speed and type of work being carried out.

ATB teeth use alternating bevels across the tooth tops and are commonly suited to crosscutting wood and producing clean finished cuts. The DW7116PT uses ATB geometry together with face-ground teeth, making this combination appropriate for its trim and precision-cutting positioning.

The DeWalt DW7116PT matches these specifications, with a 7-1/4-inch diameter, 60 teeth and a 5/8-inch arbor. DeWalt specifically describes it as a cordless miter saw blade, so users should still confirm the arbor, blade diameter and other requirements against their particular saw.

The DW7116PT has a listed kerf of 0.063 inch. Kerf is the width of material removed by the blade, so a thin kerf can help reduce the amount of material removed and is relevant when selecting a blade for smooth, efficient cuts.

DeWalt positions the DW7116PT specifically for cordless miter saws, and the blade has a 5/8-inch arbor. Other listings may identify broader saw compatibility, but users should verify the blade diameter, arbor, speed rating and manufacturer requirements for their particular saw before use.